Overview

Adeka is an innovative patented facade and roof system based on small pre-formed QUARTZ-ZINC or ANTHRA-ZINC elements featuring a unique locking key.  For other finishes please contact us. 

Structure

Adeka can be fixed to both vented open gap softwood boards and vented 18mm plywood with VMZINC Membrane. 


Areas of application

Due to the raised edges and 50mm overlaps Adeka can be used for roofing for slopes of 15 degrees and over.


Dimensions

Width 400 mm
Length 400 mm
Thickness 65 mm
Weight 75 kg/m²
No elements/m2 8.8
  • ANTHRA-ZINC
  • QUARTZ-ZINC

Documents and drawings

  • The panels are installed from bottom up with the key fixing into the lower panel.  Each Adeka tile is then secured with 3 screws.  Adeka is not supplied with filmed VMZINC.  Roofing shingles (flat lock panels) can also be installed on a roof in a similar fashion to the Adeka tile however the minimum slope for the majority of projects using diamond shingles with non-aligned joints is 45 degrees.

Do you have a question or remark? Please, leave us a message.
;

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

;